How To Fix A Large Dent In A Car Door?

Isn’t it natural that having a massive large dent in your car door is a source of frustration? No one wants to drive a car with a ding in the door. So, like every other car owner, are you going to have your car door fixed at an auto collision repair shop? That’s all right. However, if you want to try to repair the dent yourself, here are a few options.

Please understand that you will not be able to repair every dent at home. However, repairing dents yourself will save you money. The methods of How to fix a large dent in a car door we discuss in this article do not necessitate the purchase of any expensive items.

How to fix a Large Dent in a Car Door – DIY Methods:


It will be easier to remove a large dent on your car door using any of these procedures than it will be to remove smaller dents. A crease in the middle of the automobile door is the most prevalent type of dent. This procedure will allow you to quickly flip out the dent in a few minutes with no chance of making it worse, but it may not work flawlessly in some circumstances, so be prepared to take it to the body shop to iron out all of it the kinks.





1. Toilet Plunger


The first step of how to fix a large dent in a car door is to locate a dependable toilet plunger with good grip and suction when used on the car door. Don’t always go for the worn-out plunger because it may exacerbate your dent and perhaps leave marks if the rubber is old. So do yourself a favor and go out and buy a brand new plunger to save even more aggravation. The following is some information on what we’re doing: We’ll take the plunge and place the suction cup in the center of the creased section, pull the plunger out firmly, and the dented panel should snap back to normal.

It may take a few tries to get the panel in its near-perfect position, so be careful not to apply too much pressure while reattaching the plunger to the center of the crease, as this could cause the metal to revert to a dent. So, using soap and water, apply the plunger to the outside side of the creased area, and using the lubrication provided by the soap, strategically situate the plunger from the appropriate pulling point to ensure the best result.




2. Rubber Mallet


If you are an experienced car mechanic, you may prefer to remove the entire door and use a rubber mallet to paintless repair the dent from the inside of the panel. It’s crucial to note that you should never use a metal hammer if you’re new to this because it might cause smaller, ugly dents. You should obtain a rubber mallet before beginning to repair any dents on your car doors. The rubber mallet lessens the impact of each strike, resulting in a perfect dent repair job at home.



How to remove a large dent on your car’s door panel


So you’ve got the perfect mallet in your hand. And are about to slam your fist into the car door in the hopes of permanently removing the dent. So, before you start pounding on your door like a drum, you need first to adopt the proper approach.

  • First, target the ‘dent pop point.’ If you gently apply force from the inside of the panel, you should hear the metal buckle or pop, as we like to call it. This should give you a decent idea of how hard you should strike it with. It’s all about how you feel.
  • Make sure the dent is in the center of the fold.
  • It should only take one to three strong hits to bust the dent out.

That stated, this information is provided solely for amusement reasons; all advice is imperfect, and by following these instructions, you acknowledge that you are doing so at your own risk. If you are unsure about implementing these DIY dent repair procedures on your car, or if doing so could void your guarantee, don’t. It’s usually a good idea to get professional guidance from a collision body repair business, as they’ll have the knowledge and experience to help you get the best possible solution.

If you’re on a limited budget, shop around for quotes, but be sure to read the only reviews on Google Business and Yelp to avoid the many poor body shops out there that are mechanics disguising as panel beaters. Make sure to speak with a skilled panel beater who can provide you with the service you require without causing you any further issues.




What is the cost of repairing a large dent in a car door?


Depending on the car shop’s expertise and reputation. The cost can range from $50 to $150 or more, depending on the extent of the damage. Additional services, such as repairing chipped paint, can increase the cost due to its time to repair. Another wonderful approach to save money on expert repairs is to use one of the popular dent repair kits. Although the solutions listed above may assist you to fix a large dent in a car, it is always a good idea to take it to an auto body shop. You can hire an expert to help you fix your car at a reputable auto body shop.

Such skilled assistance will assist you in restoring your vehicle to its original condition. Furthermore, taking your car to an auto body shop reduces the chance of incurring additional fees due to any damage you may create by attempting to fix it yourself.

Read More:

How to make your car look cool inside?



That concludes our discussion of How to fix a Large Dent in a Car Door. Finally, taking your car to a reputable car repair shop is the best option if you’re not sure what you’re about to do in terms of repairing the dent by yourself. Approaching the dent with the incorrect tool or in the wrong technique can make it worse and cost you more money.